Product details：

SMALL PERMANENT MAGNETIC LIFMA [Model LPR-VN]  CATALOG
Permanent magnetic Lifma with enhanced operability and safety.
 
[Application]
Permanent magnetic type lifting magnets used as a lifting section of cranes and hoists for transportation of steel materials in warehouses and machining shops or for loading and unloading workpieces to and from machine tools.
These are suitable for transporting semi-finished products having a flat surface such as machine parts, press dies and plastic molds and for transporting mill scale steel plates and flat steel materials.
[Features]
All types are capable of lifting steel plates and round steel bars.
These are of permanent magnetic type requiring no power source. Thus, there is no risk of falling workpieces due to power failure or failure of wiring systems.
Powerful magnetic force but compact and light weight/
The narrowest handle operating angle of 60 degrees (patented) in the industry facilitates the ON/OFF operation in small space.
In addition to the conventional handle lock mechanism, a safety stopper is provided as a standard accessory. These double safety measures prevent falling of lifted objects due to unexpected returning of the handle. (Design registered)

Model	Liffting Capacity		Dimensions								Mass
	Steel Plate	Round dteel	W	L	G	h	H	D	F	I
LPR-VN75	75kg/165lb	50kg/110lb	90 (3.54)	80 (3.14)	160 (6.29)	15 (0.59)	135 (5.31)	40 (1.57)	15 (0.59)	45 (1.77)	5.5kg/12.1lb
LPR-VN150	150kg/330lb	100kg/220lb		130 (5.11)	260 (10.2)						8kg/17.6lb
LPR-VN300	300kg/661lb	200kg/440lb		230 (9.05)	360 (14.1)	20 (0.78)			18 (0.70)		14kg/30.8lb
LPR-VN600	600kg/1322lb	400kg/880lb	119 (4.68)	330 (12.9)	500 (19.6)	25 (0.98)	184 (7.24)	60 (2.36)	25 (0.98)	65 (2.55)	35kg/77.1lb
*The lifting capacity is indicated by a value that is a third (safety factor 3 of the max. holding power). *LPR-VN75 is not provided with a rear guard.

Steel plate lifting standard(Flat steel plates)				[mm(in)]
Model (LPR-VN) Thickness t6 t12 t25 t50 t100 75 630(24.8) 300(11.8)X1300(51.1) 600(23.6) 300(11.8)X1200(47.2) 450(17.7) 300(11.8)X650(25.5) 350(13.7) 300(11.8)X400(15.7) 240(9.44) 300(11.8)X180(7.08) 150 900(35.4) 600(23.6)X1300(51.1) 850(33.4) 600(23.6)X1200(47.2) 650(25.5) 600(23.6)X700(27.5) 500(19.6) 600(23.6)X400(15.7) 350(13.7) 600(23.6)X200(7.87) 300 1200(47.2) 900(35.4)X1550(61.0) 1250(49.2) 900(35.4)X1700(66.9) 950(37.4) 900(35.4)X1000(39.4) 700(27.5) 900(35.4)X550(21.6) 550(21.6) 900(35.4)X320(12.5) 600 1300(51.1) 1200(47.2)X1400(55.1)※ 1450(57.08) 1200(47.2)X1700(66.9) 1250(49.2) 1200(47.2)X1300(51.1) 1000(39.4) 1200(47.2)X800(31.5) 750(29.5) 1200(47.2)X450(17.7) *If plates are thinner,the handle operation becomes harder. The handle operation also becomes harder when there is clearance. The return of the handle at the time of OFF operation becomes faster.

Round steel bar lifting standard(Mill scale)			[mm(in)]
Model (LPR-VN) Steel bar Min. dia Max. dia Pipe allowable dia * 75 φ50(1.96)X750(29.5)L φ200(7.87)X150(5.90)L φφ50(1.96) - 200(7.87) 150 φφ50(1.96)X1500(59.0)L φφ200(7.87)X300(11.8)L φφ50(1.96) - 200(7.87) 300 φφ50(1.96)X3000(118)L φ300(11.8)X350(13.7)L φ50(1.96) - 300(11.8) 600 φφ100(3.93)X3000(118)L φφ400(15.7)X400(15.7)L φφ100(3.93) - 500(19.6) ※Keep in mind that the capacity drops when lifting pipes or workpieces the max. diameter of which is smaller than the attractive face. For long workpieces, consider the use of several beams.

Note: This table is presented as a guide for actual work, but does not guarantee absolute safety.
　　　　The Lifma may not perform at its maximum capacity depending on factors other than the
　　　　conditions shown in the table. Check such factors fully prior to using the Lifma.