KDTA-GT-UC
Digital Torque Analyzers
Enhanced digital processor system. Provides high performance with digital wrenches.
●LCD display eliminates reading errors.
●Processor chip assures measurement with high reliability and accuracy.
●The display unit angle can be adjusted approximately 70°.
●Saves time and helps speed up work.
●Operator can set min/max percentage parameters from 0-10%.
●Analyzer can indicate in or out of specification with PASS or FAIL displayed.
* Power source : AV100-240V 50/60Hz
* Accuracy : 1% of the indicated value +1 increment, over the full range.
* Diplya : LCD(Liqued Crystal Display) (character height : 25 mm)
* Operating temperature : 5～35℃
AT Drive attachment for KDTA-N-GT-UC series
|
AT-1 |
12×5.5-6-7-8 |
|
AT-2 |
12×9-10-11-12 |
|
AT-3 |
12×6.35 |
|
AT-4 |
14×8-9-10-11-12-13-14 |
|
AT-5 |
14×17-19-21-22-24-26 |
|
AT-6 |
14×27-29-30-32-36 |
|
AT-9 |
22×19-22-24 |
|
AT-10 |
22×27-30-32 |
|
AT-11 |
22×36-41
|
Machine
